Hand-Scraped Douglas Fir Flooring
Prefinished Hand-Scraped Doug Fir Flooring
Vintage Collection
Montana Douglas Fir has one of the highest strength-to-weight ratios of any wood species in the world. This doesn’t just make it a lightweight and strong floor; it also makes it resistant to decay.
Many old barns and granaries in the Western Rocky Mountains were built with Douglas fir, and they’re still standing strong over 200 years later. If you’re looking for a floor that’s going to last generation after generation, Montana grown Douglas fir is a great pick.
Our hand scraped mixed grain Douglas Fir wood floors are proudly made in Montana and produced from salvaged and SFI Certified Douglas Fir. Custom kiln dried to 6-8% moisture content. Our 4-sided tongue and groove Fir flooring is quality-crafted, wire-brushed, sanded, hand-rubbed with penetrating oils, and factory prefinished. It is graded to our 99% usable specifications and ready to install. Inquire about our Douglas Fir wood flooring today!
For a closer look and more information on Douglas Fir Flooring, click here.
FINISH OPTIONS
8 hand-rubbed colors and factory finished with our Low/No VOC water-based catalyzed protective floor coating.
SOLID FLOORING SPECS
Face Widths: 5 1/8″, or 7″ | Thickness: 3/4″ | Length: Random lengths up to 8′
INSTALLATION OPTIONS
Nail Down, Glue Down, Glue & Nail
In addition to our Hand Scraped Wood Floors, we also offer Wire Brushed and Circular Sawn Douglas Fir Wood Floors.
ARCHITECTURAL & DESIGN SPECS:
- MADE IN THE USA
- MINIMUM ORDER – 200 sq.ft.
- SURFACES – Floors, walls & ceilings
- SPECIES – Salvaged and sustainably certified Douglas Fir
- GRADE QUALITY – 99% usable
- STABILITY – Fine grain averaging 15 growth rings per inch
- HARDNESS – 770 Janka Rating
- MOISTURE CONTENT – Cured & kiln dried to 6-8% moisture content
- THICKNESS – Full 3/4″
- WIDTHS – 3 1/4″, 5 1/8″, & 7″ face coverage
- LENGTH – Random up to 8′
- GRAIN – Mixed
- COLOR – 8 prefinished colors
- TEXTURE – Hand scraped and lightly hand sanded
- PROFILE – Micro bevel edges, relief kerfs, clinch line, T&G and end-matched (T&G on the ends)
- FINISH – Multi step factory finish including hand rubbed penetrating oils & durable low/no VOC water based catalyzed finish
- CERTIFICATION – 100% salvaged or SFI Certified wood harvested within 100 mile radius of our facility. LEED eligible based on various criteria including salvaged and locally sourced material
- DISTRIBUTION – Factory direct shipping anywhere in the U.S.
- INSTALLATION – Nail, Glue, or Nail & Glue
- DISCLAIMER – This is a natural wood product. Color, texture, grain, and sheen will vary from board to board.
Owner and installer responsibilities
Wood is a natural material that possesses certain unique characteristics. Sustainable Lumber Co. flooring manufactures in accordance with the highest standards of quality and craftsmanship. Standard trade practice allows up to 5% margin of error for natural imperfections and manufacturing defects.
The following requirements are the responsibility of the floor’s owner, even if the owner is absent at the time of installation:
- Prior to installation, the installer and owner must ensure that the work environment and subfloors meet or even exceed minimal specification listed in the Sustainable Lumber Co. installation guide.
- Prior to installation, the installer and owner should conduct a final inspection of grade, color, manufacturing, and finish quality of boards to ensure that the floor conforms to the purchased product.
- During installation, the installer should not use boards that raise doubts about the grade, color, manufacturing quality or finish. Sustainable Lumber Co. will replace only defective boards, not exceeding the 5% margin of error allowed by industry standards.
- Sustainable Lumber Co. shall in no case be liable of installer’s lack of judgment or poor quality of installation.
- Once installed, all boards are considered as having been accepted by the installer and owner, even if owner is absent at time of installation.
Exclusions due to certain inherent properties of wood
Wood expands and contracts according to variations in humidity. Even if flooring is properly installed, narrow gaps and slight distortions can occur. Moreover, exposure to light alters the color of all wood species. Areas covered with area rugs, furniture, construction paper, and any other light blocking objects will result in color variations.
Exclusive provision for all our flooring lines
Our flooring lines are designed for a rustic appeal. Appearance of certain characteristics visible at time of purchase or developing over time, including but not limited to, the following:
- Pronounced color variations
- Color fading
- Mineral streaks
- Open and closed knots
- Bug holes
- Holes
- Checks
- Cracks and splits
- Partial or irregular milling of floorboard edges
- Localized variable thickness
- Subsidence of character traits
- Separation within character traits
- Elevation of some character traits, which become more prominent
- Localized deterioration of finish near character traits
These characteristics are considered normal for our flooring lines.
To better serve our customers and provide the best price possible, we sell and ship factory-direct anywhere in the USA. Shipping is calculated by total weight, dimensions, and zip code. In order to provide the best and most accurate delivered price to your project please contact us via: Email at [email protected] or by phone at 406.642.7120
Product Gallery
